Sensor placement invalid, must be within -50k to +50K
-
Foxwing Delta
- Ensign
- Posts: 20
- Joined: Thu Feb 04, 2016 4:04 am
- Location: Classified
Sensor placement invalid, must be within -50k to +50K
I've delt with this message for a while now.. And it's getting on my last nerve. What does this mean? -50k to +50k what? I don't get it.. This is probably a really stupid question but I just don't get it
~ Delta fox
-
SeeJay
- Captain
- Posts: 3507
- Joined: Wed Aug 11, 2010 9:03 am
- Location: Sweden
Sensor placement invalid, must be within -50k to +50K
In a sector you have +/- 100 000 positions on all three axis.
The message mean that you have to build wihing +/- 50 000 form the center of a sector on all 3 axis.
Fully zoomed in, it's in the center 4 squares you must build.
[Edited on 2016-3-15 by SeeJay]
The message mean that you have to build wihing +/- 50 000 form the center of a sector on all 3 axis.
Fully zoomed in, it's in the center 4 squares you must build.
[Edited on 2016-3-15 by SeeJay]
\"Nothing is impossible, it only takes a bit longer!\"
\"We are not retreating, we are advancing in another direction!\"
http://evochron.junholt.se (Old)
http://www.evochron2.junholt.se (New)
http://mercenary.junholt.se (Map)
http://www.junholt.se/evoschool/index.htm (No spoilers)
-8- Bzzzzzzzzz! -8- -8-
\"We are not retreating, we are advancing in another direction!\"
http://evochron.junholt.se (Old)
http://www.evochron2.junholt.se (New)
http://mercenary.junholt.se (Map)
http://www.junholt.se/evoschool/index.htm (No spoilers)
-8- Bzzzzzzzzz! -8- -8-
-
PaulB
- Commander
- Posts: 588
- Joined: Sat Feb 22, 2014 11:25 pm
Sensor placement invalid, must be within -50k to +50K
The Inner square of a sector is the 50k boundaries. You have to build stations and deploys with in that inner square (in EM anyway - can't speak for EL).From post: 186723, Topic: tid=12543, author=Foxwing Delta wrote:I've delt with this message for a while now.. And it's getting on my last nerve. What does this mean? -50k to +50k what? I don't get it.. This is probably a really stupid question but I just don't get it
-
matchbox2022
- Commander
- Posts: 609
- Joined: Fri Nov 13, 2015 3:21 pm
Sensor placement invalid, must be within -50k to +50K
Yeah, I think it's so the sensor map touches the very edge of a sector cube, without going over the boundary to the next one. Probably a game limitation made for simplicity rather than function....not a big deal, just build at x50,000, y50,000 z 50,000 +/- in any part of the sector to ensure it reaches an edge.
At least I THINK
Do sector pods only cover the green area, or the entire sector, or something in between?
NOT probes, I know they are smaller coverage
At least I THINK
Do sector pods only cover the green area, or the entire sector, or something in between?
NOT probes, I know they are smaller coverage
Do, or do not, there is no try.
- An Asian father.
- An Asian father.
-
CS-ACI-
- Commander
- Posts: 779
- Joined: Thu Mar 20, 2008 7:34 am
- Location: UK
Sensor placement invalid, must be within -50k to +50K
Hello,
Yes, all three co-ords x,y,z need to be within the range of -50,000 to +50,000. You can check this on the nav map.
@matchbox2022, I guess you mean the deployed sensor. I covers the area withing the circle +- a little. When deployed you should see on you nav map an extra detailed area showing ships and some objects.
Steve
Yes, all three co-ords x,y,z need to be within the range of -50,000 to +50,000. You can check this on the nav map.
@matchbox2022, I guess you mean the deployed sensor. I covers the area withing the circle +- a little. When deployed you should see on you nav map an extra detailed area showing ships and some objects.
Steve
[align=center][SW] CS-ACI-
Desk jockey and experimental pilot.
[/align]
Desk jockey and experimental pilot.
[/align]