Mission failed after warping

[archlazurus]

My friend and I were just playing in multiplayer in Evochron Mercenary for the first time and we ran into the same problem multiple times until we just decided to play again later. I'd accept a mission and it would give the mission to the both of us, we warp over to the nav point, but the second he finishes warping he fails the mission.

Would anyone know what the cause/solution to this is? If it helps, we both picked mercenary and were accepting quests at the station in Sapphire. Most of the time it was the destroy x asteroids or clean solar panels.

Edit: I just went into singleplayer, accepted a mission to destroy 20 asteroids, and when I warped I failed the mission.

[Edited on 11-7-2010 by archlazurus]

[MMaggio]

You left the area before the mission specifics were completed. You should have brought it up when playing MP and others would have helped you, err... assuming you wre playing on the Remila One server
Good luck

[Vice]

Just don't leave the sector if/when you accept a contract, it will be considered abandoned and will fail.

[Maarschalk]

Make sure when you Jump/Warp you do not Warp out of the sector of the contract. Your jump coordinates might be 1 sector of.

Make sure your jump point sectror coordinates SX, SY, SZ, matches the sectors contract SX, SY, SZ, coordinates. The insector x,y,z destination coordinates can be different and should be your insector waypoint coordinates within Sector SX, SY, SZ.