Navigation Waypoints

tals · Post by **tals** » Thu Sep 24, 2009 10:24 pm

I took a contract so the system set my Waypoint, so that was good. However that would have led me jumping through a planet so I thought i'd jump to the side and then back to the waypoint. However when I did that I think I lost where the original waypoint was. Is that intential - i.e should I have noted the waypoint before setting further ones?

Post by **Vice** » Thu Sep 24, 2009 10:36 pm

The waypoint will remain on your nav map (colored green) until it is activated. So you don't have to keep track of it. However, don't leave the sector as that will be considered abandoning the contract.

tals · Post by **tals** » Fri Sep 25, 2009 8:40 pm

Ahhh coloured green works for me. Many thanks.

Tals

p.s is there a Evochron Wiki?

Maarschalk · Post by **Maarschalk** » Sat Sep 26, 2009 3:14 am

Originally posted by tals
I took a contract so the system set my Waypoint, so that was good. However that would have led me jumping through a planet so I thought i'd jump to the side and then back to the waypoint. However when I did that I think I lost where the original waypoint was. Is that intential - i.e should I have noted the waypoint before setting further ones?

If you jump to the side to a different waypoint then the contract waypoint then the contract way point will be indicated on your Nav Map by a Blue empty box. And you loose the Green box. If you want to jump to a Waypoint on the side of the contract one enter the coordinates from destination contract Waypoint in you Navigational Map Log then set your side waypoint and jump to your side Waypoint and then to the blue numbered contract waypoint from your Map log. Or if you do not use your Map log then just jump to the Blue Empty box on your Nav Map. This works only with single waypoint missions thou!;)