Problems with the Logitech Rumblepad 2 *FIXED*

Maker · Post by **Maker** » Sat Mar 05, 2011 2:20 pm

I played the Demo of evochron mercenary (1.088) and configured my Rumblepad 2 their. Worked perfectly.
I've bought recently evochron mercenary and updated the game to the version 1.288
I have configured the secondary throttle control on the Button 3 and 4 of the Rumblepad. This worked perfectly in 1.088 but in 1.288 it downed work anymore. Everything else on works e.g. Primary Fire on Button 7, Secondary Fire on Button 8.
I only have 3 Axis (Turn, Pitch and Roll) defined.

[Edited on 5-30-2011 by Vice]

49rTbird · Post by **49rTbird** » Sat Mar 05, 2011 3:14 pm

Hello Maker, Stand by an help will arrive. Welcome to the forum and the Sim. Have fun and hope to see you out there sometime when you get it working again.

Maker · Post by **Maker** » Sat Mar 05, 2011 3:57 pm

I tried but it now but it didn't helped

MMaggio · Post by **MMaggio** » Sat Mar 05, 2011 4:20 pm

I'm sure it's something simple. Did you make sure to select "joystick" control in the options menu? The axis program is pretty much fool-proof. if it worked for the demo, it weill work for the game.

Maker · Post by **Maker** » Sat Mar 05, 2011 5:01 pm

Yeah its set to joystick. I just installed the 1.088 version parallel. The configuration works their just fine. Looks like its has definitely something do to with the version.

Post by **Vice** » Sat Mar 05, 2011 5:43 pm

When you push and hold one of the buttons for secondary throttle control on the Rumblepad, does the 'Set:' speed change slightly, then if you release the button, it returns to its original value?

Maker · Post by **Maker** » Sat Mar 05, 2011 6:07 pm

nope it stays at 0

Post by **Vice** » Sat Mar 05, 2011 6:14 pm

Do the primary throttle control functions work when you bind them? What happens when you turn off the IDS and then try to use the secondary throttle controls? If it continues, please send me your keymap8.sw, sw.cfg, and stickt.sw files attached to an e-mail.

Maker · Post by **Maker** » Sat Mar 05, 2011 6:45 pm

The Throttle control bind to an axis or the keyboard works fine. If I turn of the IDS and try change the throttle via the gamepad nothing happens.
Where can I find the keymap8.sw, sw.cfg, and stickt.sw files?

Post by **Vice** » Sat Mar 05, 2011 6:46 pm

In the save data folder ( http://www.starwraith.com/forum/viewtopic.php?t=3433 ).

Maker · Post by **Maker** » Sat Mar 05, 2011 7:41 pm

I mailed the the requested files to the support email.

Post by **Vice** » Sat Mar 05, 2011 8:49 pm

It was an issue with the secondary throttle control input system. I've updated it for the next test build and I'll try to have the update available for download shortly.

Maarschalk · Post by **Maarschalk** » Sat Mar 05, 2011 11:37 pm

Hi Maker, welcome to the game and forum. See you out there some time....

Maker · Post by **Maker** » Sat Mar 05, 2011 11:50 pm

StarWraith 3D Games Forum

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED

Problems with the Logitech Rumblepad 2 FIXED