Hi
What is the best settings for EL to work with three monitors. I can't seems to get the HUD in the center.
Three Monitors 5780 x1080
-
- Administrator
- Posts: 11564
- Joined: Fri Apr 25, 2003 1:38 am
Three Monitors 5780 x1080
There are a couple of ways to make adjustments that might help fine tune it. Probably the primary one you want to focus on in the aspect ratio option. In the sw.cfg file (located in the save data folder, default c:\\sw3dg\\EvochronLegacy), the 15th line from the bottom or 17th line from the top is the aspect ratio value. It should show 0 by default. You can set that value to something like 1.0, then adjust it up or down until you get the aspect ratio that fits well with the resolution you are trying to use.
-
- Ensign
- Posts: 6
- Joined: Sat Mar 26, 2011 8:55 am
Three Monitors 5780 x1080
Thanks for replyng.From post: 182784, Topic: tid=12210, author=Vice wrote: There are a couple of ways to make adjustments that might help fine tune it. Probably the primary one you want to focus on in the aspect ratio option. In the sw.cfg file (located in the save data folder, default c:\\sw3dg\\EvochronLegacy), the 15th line from the bottom or 17th line from the top is the aspect ratio value. It should show 0 by default. You can set that value to something like 1.0, then adjust it up or down until you get the aspect ratio that fits well with the resolution you are trying to use.
Will try it out tonight.
Alot to lean in EL.
-
- Ensign
- Posts: 6
- Joined: Sat Mar 26, 2011 8:55 am
Three Monitors 5780 x1080
What can I say!!!
But, WOW!
set it to 4.0 and it works.
I'm now using Three monitors and it is great!! Thanks again.
Pity I could not transfer my small 1.6M credit from EM. But, I'm pleased that EL is working so-far!!.
But, WOW!
set it to 4.0 and it works.
I'm now using Three monitors and it is great!! Thanks again.
Pity I could not transfer my small 1.6M credit from EM. But, I'm pleased that EL is working so-far!!.
From post: 182826, Topic: tid=12210, author=Fhalo wrote:Thanks for replyng.From post: 182784, Topic: tid=12210, author=Vice wrote: There are a couple of ways to make adjustments that might help fine tune it. Probably the primary one you want to focus on in the aspect ratio option. In the sw.cfg file (located in the save data folder, default c:\\sw3dg\\EvochronLegacy), the 15th line from the bottom or 17th line from the top is the aspect ratio value. It should show 0 by default. You can set that value to something like 1.0, then adjust it up or down until you get the aspect ratio that fits well with the resolution you are trying to use.
Will try it out tonight.
Alot to lean in EL.